Boston

Boston FD TCM3-51725 was implemented in response to serious difficulties encountered when fire standpipes at construction and demolition sites were damaged, rendering the standpipes unsuitable for fire department use. The directive requires that all fire standpipes in vacant buildings, buildings undergoing demolition, and required permanent or temporary standpipes in buildings under construction be equipped with a system to pressurize the standpipe at all times, which then would sense the pressure loss if a portion of the standpipe was damaged or completely removed. Detailed requirements for the system are specified in the directive. STANDPIPE-PAC™ has been designed to aid in compliance with the requirements in Boston FD TCM3-51725.

IMPORTANT: Boston FD TCM3-51725 requires that an application to install an air pressurized alarm system be filed by a registered design professional, and a permit obtained by a licensed sprinkler contractor. A licensed electrician shall obtain all required electrical permits. Install STANDPIPE-PAC™ after application is made and accepted, and all permits received. To review Boston FD TCM3-51725 in its entirety, please click the following link… Requirements for Air Pressurized Standpipes – TCM3-51725

Related Boston FD TCM3-51725 Links

• Boston – Requirements for Air Pressurized Standpipes – TCM3-51725
• Boston – Air Pressurized Dry Stand Pipe Summary – TCM3-51726

STANDPIPE-PAC Product Information

• IMPORTANT – Technical Note – STANDPIPE-PAC – Maintenance Of Desiccant Air Dryer – UFS-19-01 Rev. 1.00
• IMPORTANT – Technical Note – STANDPIPE-PAC – Wiring External Audible Devices – NYC – UFS-18-02N Rev 1.00
• IMPORTANT – Technical Note – UFS-18-01 Rev 1.00 STANDPIPE-PAC – Installation for Proper Draining – UFS-18-01 Rev 1.00

Data Sheets

• STANDPIPE Supervisory System (Boston) – UFS-212 Rev 2.01

Info Sheets

• STANDPIPE-PAC – Estimating Fill Time (Boston) – UFS-228 Rev 1.00

Manuals

• SSS-101 – Design, Installation, Operation, and Maintenance Manual (Boston) – 10-540101-001 Rev 2.00
• STANDPIPE-PAC SSS-101 – Use Instructions (Boston) – UFS-224 Rev 2.00
• Instruction Sheet – Auxiliary Condensate Drain – UFS-345 Rev 1.03

Technical Notes & Important Info

• Location, Inspection & Maintenance – UFS-15-01 Rev 1.00
• Lessons Learned About Temperature & Maintenance – UFS-15-02 Rev 1.01
• Required Supervisory Pressure – UFS-17-05 Rev 1.01
• Operation in Cold Weather – UFS-17-07 Rev 1.00

Commissioning & Maintenance Checklists

• Inspection / Maintenance Checklist – UFS-236 Rev 2.01
• Commissioning Checklist (Boston) – UFS-238B Rev 1.00

Warranty Information

• STANDPIPE-PAC – Limited Warranty – New – UFS-208A Rev 3.00
• STANDPIPE-PAC – Limited Warranty – Refurbished by UNITED Fire Systems – UFS-208B Rev 1.00

Sales Literature

• STANDPIPE-PAC – Before You Buy…(Boston) – UFS-226 Rev 2.00

Engineering Specifications & Drawings

• STANDPIPE-PAC for Boston – MasterFormat Spec – UFS-227 Rev 1.01
• STANDPIPE-PAC for Boston – DWG Spec & Details – UFS-230 Rev 1.02

STANDPIPE-PAC Links

• STANDPIPE-PAC Home
• New York City