908.688.0300

STANDPIPE-PAC

The UNITED Fire Systems STANDPIPE-PAC is a fully assembled standpipe supervisory system, including compressor, switches, alarm, and control unit providing one complete zone of standpipe supervision. The STANDPIPE-PAC is in compliance with New York City’s Local Law 64 and the Boston Fire Department’s TCM3-51725. All components are mounted on a sturdy wooden backboard, suitable for hanging at a construction or demolition site.

To learn more, give us a call at 908.688.0300 or contact us online to learn more. 

STANDPIPE-PAC Features & Connections

The connection from the system to the standpipe is conveniently located on the front of the unit. The 120 VAC power connection is made in a pre-mounted junction box. This one connection provides power for both the compressor and the control panel.

The STANDPIPE-PAC also includes:

  • Air compressor
  • Automatic compressor cut-in and cut-out
  • Pressure switch operating on pressure drop
  • Pressure switch operating over 25 PSIG
  • Local audible alarm
  • Active, dedicated power supply
  • Check valve to prevent water from entering the compressor
  • Air dryer
  • Lockable shutoff valve
  • Manual air release vale (to be field installed)
  • Silenceable audible(s)
  • Provision for a remote audible device (supervised)
  • Power backup batteries
  • Local gauge to monitor air pressure
  • Compressor power disconnect switch
  • Fully factory assembled and tested
  • No field assembly required
  • Connects to 120VAC and to the standpipe
  • Easy-to-follow instructions on enclosure front
  • Complete instructions for installation and testing
  • Digital communicator standard with monitoring options available

Contact UNITED Fire Systems Today

Give us a call at 908.688.0300 or contact us online to request more information about the STANDPIPE-PAC system. 


STANDPIPE-PAC (NYC)

The UNITED Fire Systems STANDPIPE-PAC is a fully assembled standpipe supervisory system, including compressor, switches, alarm, and control unit providing one complete zone of standpipe supervision. The STANDPIPE-PAC is in compliance with New York City’s Local Law 64 and the Boston Fire Department’s TCM3-51725. All components are mounted on a sturdy wooden backboard, suitable for hanging at a construction or demolition site.

Product Information

STANDPIPE-PAC (Boston)

The UNITED Fire Systems STANDPIPE-PAC is a fully assembled standpipe supervisory system, including compressor, switches, alarm, and control unit providing one complete zone of standpipe supervision. The STANDPIPE-PAC is in compliance with New York City’s Local Law 64 and the Boston Fire Department’s TCM3-51725. All components are mounted on a sturdy wooden backboard, suitable for hanging at a construction or demolition site.

Product Information

Did You Know?
  • Your dry-pipe or preaction system piping may look brand new on the outside, but what about inside? Residual water and oxygen in the pressurized air could be rusting the interior of that pipe right now. This rust can weaken the pipe, cause pinholes to form, and even clog up the sprinkler heads in the event of a fire. NFPA 25 – Standard for the Inspection, Testing and Maintenance of Water-Based Fire Protection Systems mandates internal inspection of sprinkler pipes at least every 5 years. Are your pipes rusty? Have them internally inspected by a qualified fire protection contractor before it’s too late.