908.688.0300

PREACTION-PAC™


PREACTION-PAC™ is a Factory Mutual (FM) approved, fully integrated preaction fire suppression assembly. This preaction cabinet includes a preaction valve, compressor, and control panel providing one complete zone of preaction water sprinkler fire protection.

To learn more about the PREACTION-PAC™ fire suppression assembly, give us a call at 908.688.0300 or contact us online.

About PREACTION-PAC™

All components of this preaction fire sprinkler system are contained in two steel enclosures assembled one above the other. The system pressure gauges and the manual release handle are mounted on the front of the lower enclosure. The system detection and control panel is mounted behind a door in the upper enclosure with a clear polycarbonate window allowing visual access to the system indicators. Lockable latches on both doors permit authorized access to all system components. Both enclosures are finished in powder-coat red paint. Gasketing provides sealing of the enclosure doors and knockouts permit easy attachment of external electrical conduits.

PREACTION-PAC™ Features

  • FM Approved
  • CSFM Listing No. 7080-2143:0100
  • FDNY Certificate of Approval # 6148
  • Fully factory assembled, programmed, and tested
  • No field assembly required
  • Includes detection/control panel and preaction valve
  • Just connect water supply, drain, and field electrical devices
  • Attractive and rugged metal enclosure
  • Easy-to-see gauges on front of enclosure
  • Easy access to the manual release valve
  • Installation drawings available
  • Low and upper water inlet connections
  • Easy-to-follow instructions on enclosure front
  • Space for required spare sprinkler heads and wrench
  • Separate mechanical and electrical enclosures
  • 1-1/2″ through 4″ valve options
  • Addressable or conventional control panel options

PREACTION-PAC™ Benefits

  • Saves assembly and programming time
  • Quicker commissioning—just place, connect, and it’s ready
  • Finished appearance allows placement in or near hazard
  • Easy inspection and maintenance
  • Rapid access to manual release handle
  • Up to 636 addressable points on one system
  • Reliable, dependable protection that functions as designed
  • Expert field and in-house technical support

Interactive Single Interlock Preaction-PAC™ Chart (clickable)


Interactive Double Interlock Preaction-PAC™ Chart (clickable)


Contact UNITED Fire Systems Today

Give us a call at 908.688.0300 or contact us online to request more information about the PREACTION-PAC™ system. 

PREACTION-PAC

PREACTION-PAC is a Factory Mutual (FM) approved, fully integrated preaction fire suppression assembly. It includes a preaction valve, compressor, and control panel providing one complete zone of preaction water sprinkler fire protection.

Product Information

Did You Know?
  • Your dry-pipe or preaction system piping may look brand new on the outside, but what about inside? Residual water and oxygen in the pressurized air could be rusting the interior of that pipe right now. This rust can weaken the pipe, cause pinholes to form, and even clog up the sprinkler heads in the event of a fire. NFPA 25 – Standard for the Inspection, Testing and Maintenance of Water-Based Fire Protection Systems mandates internal inspection of sprinkler pipes at least every 5 years. Are your pipes rusty? Have them internally inspected by a qualified fire protection contractor before it’s too late.