The FM Approved UNITED Fire Systems PREACTION-PAC™ is a fully assembled preaction fire suppression system, including preaction valve, trim, and optional control panel, providing one complete zone of preaction water sprinkler fire protection. All components are contained in two (2) red powder-coated steel enclosures assembled one above the other. The system pressure gauges are mounted on the front of the valve enclosure. The system detection and control panel is mounted behind a door on the electrical enclosure with a clear polycarbonate window allowing examination of the system visual indicators. Lockable latches on both doors permit restricted access to connections and components. A manual release valve is located behind a non-locking door on the valve enclosure. Gasketing provides sealing of the enclosure doors. Knockouts permit easy attachment of external electrical raceways.
To learn more about the PREACTION-PAC™ fire suppression assembly, give us a call at 908.688.0300 or contact us online.
CSFM Listing No. 7080-2143:0100
FDNY Certificate of Approval # 6148
Includes preaction valve with optional control panel and supervisory pressure source
Fully factory assembled, programmed, and tested
No field assembly required
Just connect water supply, drain, sprinkler piping, power, and electrical devices
Lower left or right side water inlet and drain connections
Attractive, rugged, powder-coated metal enclosures
Separate, lockable valve and electrical enclosures
Easy-to-see pressure gauges on enclosure front
Manual actuation valve behind separate non-locking door
Space for required spare sprinkler heads and wrench
Easy-to-follow instructions on enclosure front
1-1/2 through 6 inch valve options
Addressable or conventional control panel options
Saves assembly, programming, and installation time
Installation drawings available
Quicker commissioning – just place, connect, and it’s ready
Easy inspection and maintenance
Finished appearance allows placement in or near protected space
Rapid access to manual release handle without a key
Reliable, dependable protection that functions as designed
Expert in-house field and technical support
Contact UNITED Fire Systems Today
Give us a call at 908.688.0300 or contact us online to request more information about the PREACTION-PAC™ system.
Your dry-pipe or preaction system piping may look brand new on the outside, but what about inside? Residual water and oxygen in the pressurized air could be rusting the interior of that pipe right now. This rust can weaken the pipe, cause pinholes to form, and even clog up the sprinkler heads in the event of a fire. NFPA 25 – Standard for the Inspection, Testing and Maintenance of Water-Based Fire Protection Systems mandates internal inspection of sprinkler pipes at least every 5 years. Are your pipes rusty? Have them internally inspected by a qualified fire protection contractor before it’s too late.