908.688.0300

NITROGEN-PAC™ SC SERIES

 

The NITROGEN-PAC™ SC (Self-Contained) Series is a family of FM Approved nitrogen-based sprinkler corrosion inhibiting systems, providing high-purity dry nitrogen for the interior of preaction and dry sprinkler piping. These units feature a nitrogen compressor for system fast-fill and nitrogen generation, refrigerated drying of the air for the lowest possible moisture content, and membrane technology for nitrogen generator efficiency. The NITROGEN-PAC™ SC Series factory-assembled units save space and shorten installation and commissioning time.

Give us a call at 908.688.0300 or contact us online to learn more!

NITROGEN-PAC™ SC Series Features & Benefits:

  • FM Approved
  • Fully factory assembled, adjusted, and tested
  • No field assembly required
  • Just attach AC power and run piping to sprinkler riser
  • Built-in UL Listed oilless nitrogen compressor
  • UL Listed refrigerated dryer delivers -40°F dew point air
  • Membrane-based nitrogen generator
  • Built-in particulate and coalescing filters
  • Single or multiple riser capable
  • 22 gallon nitrogen receiver
  • Digital compressor runtime monitor
  • Visual indicators of system status
  • Leveling feet
  • Rugged steel construction
  • Saves installation, assembly, and testing time
  • Smallest footprint complete nitrogen system available today
  • Quicker commissioning—just place, connect, and it’s ready
  • Nitrogen generation and sprinkler fast-fill (per NFPA 13) from just one unit
  • Our new True Advanced Purge (TAP) can be used with the NITROGEN-PAC™ SC!

Give us a call at 908.688.0300 or contact us online to learn more about the NITROGEN-PAC™ SC Series.


Resources


Certifications And Approvals


Commissioning & Maintenance Checklists


Data Sheets


Engineering Specifications & Drawings

For .DWG and .DOC versions of these documents, download our Specification Developer


Info Sheets


Manuals


Sales Literature


Technical Notes & Important Info


Warranty Information

Did You Know?
  • Your dry-pipe or preaction system piping may look brand new on the outside, but what about inside? Residual water and oxygen in the pressurized air could be rusting the interior of that pipe right now. This rust can weaken the pipe, cause pinholes to form, and even clog up the sprinkler heads in the event of a fire. NFPA 25 – Standard for the Inspection, Testing and Maintenance of Water-Based Fire Protection Systems mandates internal inspection of sprinkler pipes at least every 5 years. Are your pipes rusty? Have them internally inspected by a qualified fire protection contractor before it’s too late.